home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.minix
- Path: sparky!uunet!mcsun!sun4nl!relay.philips.nl!philce!meulenbr
- From: meulenbr@ce.philips.nl (Frans Meulenbroeks)
- Subject: Re: missing/incorrect lib files in 1.6.23
- Message-ID: <1992Dec22.131817.314@philce.ce.philips.nl>
- Sender: usenet@philce.ce.philips.nl (USENET post news)
- Organization: Philips Consumer Electronics, Eindhoven
- References: <1992Dec21.002320.27626@nntpd.lkg.dec.com>
- Date: Tue, 22 Dec 1992 13:18:17 GMT
- Lines: 39
-
- powers@asd.enet.dec.com (Bill Powers) writes:
- >Hi,
-
- > I am attempting to upgrade to ST Minix 1.6.23. I started with
- >1.5.10. I ftp'd from ftp.thp.uni-koeln.de all of AST's 1.6.23 upgrade
- >files for the IBM PC. Also, I had all of Frans's posts from comp.os.minix
- >for 1.6.23. All source trees look good after patching except for the
- >lib tree. I am missing a number of the subdirectories off of /src/lib
- >as well as having completely wrong CRC's from what is in AST's crc list
- >he provided with his upgrade kit. For example I am missing many of the
- >files in the ansi subdir, and those that I have the CRC's for, are
- >completely wrong. AST had an upgrade file ansi.sh for the ansi subdir,
- >but it only had the source for signal.c in it. Does anyone know where
- >the correct patches/upgrade files for the lib tree can be found at?
- >Here is what appears to be missing or is wrong.
-
- >/src/lib/ansi - Missing some files, and most files have wrong CRC.
- >/src/lib/em - Missing these [ are these pc files? ]
- >/src/lib/float - Missing all files. [ are these for ansi compiler? ]
- >/src/lib/math - Missing all files. [ are these for ansi compiler? ]
- >/src/lib/rts - Missing all files. [ are these for ansi compiler? ]
- >/src/lib/stdio - Missing all files.
-
- I don't think you are missing something.
- lib/em is pc specific. The atari stuff is in lib/em_68000, which was in
- my post.
-
- For the other dirs use the 1.5 versions.
- Andy's crc list probably contained the ansi cc versions.
-
- If you follow the upgrade path I decribed in the doc, and take the
- posted messages also into account (e.g. first build and install cv)
- it is possible to upgrade using your tree.
-
- Good luck,
-
- --
- Frans Meulenbroeks Philips Research Laboratories
- preferred email address: meulenbr@prl.philips.nl
-