home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!faculty!nmrdc1!dsc3pzp
- From: dsc3pzp@nmrdc1.nmrdc.nnmc.navy.mil (Philip Perucci)
- Newsgroups: comp.os.linux
- Subject: Re: LILO 7 and LINUX 0.99.1
- Message-ID: <BzsI1G.2K8@nmrdc1.nmrdc.nnmc.navy.mil>
- Date: 25 Dec 92 00:44:03 GMT
- References: <72348@cup.portal.com>
- Organization: Naval Medical Research & Development Command
- Lines: 15
-
- In article <72348@cup.portal.com> Dave-Nuttall@cup.portal.com (David Dave Nuttall) writes:
- >My /etc/lilo/config is:
- >install = /etc/lilo/boot.b
- >image = /Image
- > label = lin-hd
- > root = /dev/hda1
-
- Try adding "boot = /dev/hda" prior to "install = ..." line.
-
-
- --
- ===========================================================================
- phil perucci | "Any opinions expressed are solely my own views and
- ssb1pzp@digex.com | do not reflect the position of any organization"
- ===========================================================================
-