home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!paladin.american.edu!howland.reston.ans.net!zaphod.mps.ohio-state.edu!news.acns.nwu.edu!telecom-request
- Date: 2 Jan 93 15:30:05 EST
- From: crw@icf.hrb.com (Craig R. Watkins)
- Newsgroups: comp.dcom.telecom
- Subject: Re: Panasonic KXT-123211 Software
- Message-ID: <telecom13.5.2@eecs.nwu.edu>
- Organization: HRB Systems, Inc.
- Sender: Telecom@eecs.nwu.edu
- Approved: Telecom@eecs.nwu.edu
- X-Submissions-To: telecom@eecs.nwu.edu
- X-Administrivia-To: telecom-request@eecs.nwu.edu
- X-Telecom-Digest: Volume 13, Issue 5, Message 2 of 9
- Lines: 21
-
- In article <telecom12.927.8@eecs.nwu.edu>, petrisko@evax2.engr.
- arizona.edu (William Petrisko) writes:
-
- > Does anyone know of PC software available as a front-end to
- > programming the Panasonic phone system?
-
- I would also be interested.
-
- > Also (just an annoyance factor) when dialing, it seems that the
- > touchtone echo is *delayed* until you get to the third or fourth
- > digit.
-
- I believe if you decrease your CO line "Pause Time" (default: 3.5 sec)
- this may help your problem. I believe the PBX is delaying your tones
- from your CO line in order to give the CO time to provide dial tone.
-
-
- Craig R. Watkins crw@icf.hrb.com
- HRB Systems, Inc. +1 814 238-4311
-
-