home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.modems
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!howland.reston.ans.net!wupost!gumby!destroyer!cs.ubc.ca!newsserver.sfu.ca!sfu.ca!mckeeveb
- From: mckeeveb@monashee.sfu.ca (Gumby - The unknown user)
- Subject: Re: ZyXEL voice and flow control
- Message-ID: <mckeeveb.725842722@sfu.ca>
- Keywords: ZyXEL voice flow control
- Sender: news@sfu.ca
- Organization: Simon Fraser University, Burnaby, B.C., Canada
- References: <rkimball.725840444@athena>
- Date: Thu, 31 Dec 1992 22:58:42 GMT
- Lines: 22
-
- rkimball@athena.qualcomm.com (Robert Kimball) writes:
-
- >I have been playing around with voice mail and my ZyXEL and ran into
- >a problem. It does not appear that flow control works in voice mode.
- >I have set the modem to hardware flow control with the at&h3 command
- >and get everything set to send voice data to the modem. My computer
- >talks to the modem at 56Kbps and when I send the voice data to the
- >modem the audio skips sections of speach but is inteligible. I know
- >the file is OK because if I reduce the speed that I send the voice data
- >to the modem everything works fine...but this is not the correct
- >solution. Does anyone have any ideas?
-
- I believe this was stated in the voice-mode commands addendum to the
- original manual. It does say that XON and XOFF should work.
-
- (This is, of course, assuming that I read into it correctly)
-
- --
- Rob McKeever VE7ICJ rmckeeve@sfu.ca mckeeveb@sfu.ca 604-291-0457
- "Do you know what standards are? They're career paths for people who don't
- want to work!" - John Parkinson, Ernst & Young at the BCDMA Conference '92
- -*- Standard Disclaimers should be adequate -*-
-