home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!paladin.american.edu!europa.asd.contel.com!howland.reston.ans.net!usc!cs.utexas.edu!sun-barr!olivea!spool.mu.edu!umn.edu!csus.edu!netcom.com!alm
- From: alm@netcom.com (Andrew Moore)
- Newsgroups: comp.unix.bsd
- Subject: Re: [386bsd] 16550 and rtscts patch
- Message-ID: <1992Dec15.002944.11215@netcom.com>
- Date: 15 Dec 92 00:29:44 GMT
- References: <Bz25Io.L40@ucunix.san.uc.edu> <1992Dec14.171834.7500@fcom.cc.utah.edu>
- Organization: Netcom - Online Communication Services (408 241-9760 guest)
- Lines: 18
-
- In article <1992Dec14.171834.7500@fcom.cc.utah.edu> terry@cs.weber.edu (A Wizard of Earth C) writes:
- >In article <Bz25Io.L40@ucunix.san.uc.edu> pmartin@eniac.san.uc.edu (Paul Martin) writes:
- >>
- >>I applied the rtscts flow control patch to the com driver that was
- >>posted here sometime back. Now I cannot send anything to the modem. The
- >>modem does not receive the characters, and the command:
- >>echo ats0=1 > /dev/com2
- >>seems to hang until I shut off the modem. This worked before the patch.
- >>I am using 16550's. By the way, the mouse on com1 still works fine.
- >>
- >>Any Ideas?
- >
- >I haven't had a chance to look at the patch yet (I did save it off);
-
- I thought Chris Demetriou mentioned that there were some additional
- changes needed to make this patch work (?) Anyhow, it is
- incorported into his multiport serial driver and works fine.
- -Andrew Moore <alm@netcom.com>
-