home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.text.frame
- Path: sparky!uunet!ftpbox!mothost!merlin.dev.cdx.mot.com!haluk
- From: haluk@merlin.dev.cdx.mot.com (Haluk Gumrukcu)
- Subject: Re: a question
- Message-ID: <1992Dec17.200633.28870@merlin.dev.cdx.mot.com>
- Originator: haluk@turlough.dev.cdx.mot.com
- Sender: news@merlin.dev.cdx.mot.com (USENET News System)
- Nntp-Posting-Host: turlough.dev.cdx.mot.com
- Organization: Motorola Codex, Canton, MA
- References: <1992Dec15.192956.21131@walter.bellcore.com>
- Date: Thu, 17 Dec 1992 20:06:33 GMT
- Lines: 10
-
-
-
- First of all, connecting two text frames (using Page-ColumnConnections-Connect
- TwoColumns) should work. And yes, when you do that, first selection will be
- deselected automatically. But FM will remember that, so it WILL connect two
- columns. Here, the order of selection is important.áSo, if you want backward
- flow, simply select the latter column first and then the previous column.
- (so it says in the document). I didn't verify this, but you may try if you
- didn't get any other suggestions.
-
-