home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.palmtops
- Path: sparky!uunet!mcsun!sunic!ericom!kirin!danne
- From: danne@kirin.ericsson.se (Anders Danne)
- Subject: PC-3100 problem
- Message-ID: <1992Dec16.130912.9391@ericsson.se>
- Sender: danne@kirin (Anders Danne)
- Nntp-Posting-Host: kirin.ericsson.se
- Organization: Ericsson
- Date: Wed, 16 Dec 1992 13:09:12 GMT
- Lines: 19
-
- I have a Sharp PC3100 with two 2M SRAM's. Before I turn on the
- power I have to pull out the release buttons on front. After
- power on I push them in to lock and everything works.
-
- If I don't do this I get a warning on a bad memory card from the
- B: drive. Additionally files on the RAM cards can not be read or
- written. This will be cured If I release and lock again.
-
- Sometimes the cards are lost during a session and I have to release
- and lock. This is very annoying if a program use the disk and halts
- the whole PC.
-
- I have used a PoqetPC a lot without any problems at all.
-
- Have anybody experienced the same problems?
-
- ///Anders Danne
-
-
-