home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.hardware
- Path: sparky!uunet!enterpoop.mit.edu!bloom-picayune.mit.edu!athena.mit.edu!rajiv
- From: rajiv@athena.mit.edu (Rajiv A Manglani)
- Subject: Re: Quadra 950/19", GC Also?
- Message-ID: <1992Dec14.173510.21936@athena.mit.edu>
- Sender: news@athena.mit.edu (News system)
- Nntp-Posting-Host: w20-575-67.mit.edu
- Organization: Massachusetts Institute of Technology
- References: <1992Dec14.142457.829@pcnntp.apple.com>
- Date: Mon, 14 Dec 1992 17:35:10 GMT
- Lines: 20
-
-
- In article <1992Dec14.142457.829@pcnntp.apple.com>, Dale_Adams@gateway.qm.apple.com (Dale Adams) writes:
-
- [deleted]
-
- |> rate, 80 MHz pixel clock, 1024 x 768 resolution. To get the Quadra frame
- |> buffer to generate this timing the three monitor sense line pins must be wired
- |> as follows: wire pins 4 and 7 together (but
- |> not to ground) and leave pin 10 unconnected.
- |>
- |> - Dale Adams
- |> Apple Computer, Inc.
-
- So does this mean the the 8*24 GC card can support 1024x768 also? I have an
- Emachines T16-II hooked up to one, and their tech support said that they
- cannot give me an adapter to run it at the 19" resolution because "Apple
- has not publicized the sense codes." Wil what you write above allow my setup
- to work properly at 1024x768?
-
- Rajiv
-