home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.misc
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!rpi!clarkson!chengb
- From: chengb@craft.camp.clarkson.edu (Bruce)
- Subject: Need help with Zeos 486/66 with AHA1542B!!!!!
- Message-ID: <chengb.724909857@craft.camp.clarkson.edu>
- Sender: news@news.clarkson.edu
- Nntp-Posting-Host: logic.camp.clarkson.edu
- Organization: Clarkson University
- Date: Mon, 21 Dec 1992 03:50:57 GMT
- Lines: 26
-
- Does anyone own a Zeos 486/66 and is working with a AHA 1542B?
-
- I'm currently trying to get it coexist with the existing IDE drive
- and am using the AHA1542B only for one external drive.
-
- I haved tried all DMA, IRQ, Port, and made sure that termination is
- correct. The current SCSI ID is 0. When I used the onboard bios
- to detect it as drive D: (IDE drive is C:), it is fine, but that external
- drive is a removable, so I needed to use ASPI4DOS AND ASPIDISK to run
- it. However, ASPI4DOS wouldn't complete the loading process, such that
- it displays the card info (IRQ, PORT, etc) when I use /d option, and is
- "hung" right there with the LED on forever.....I suspect this is a problem
- with driver which doesn't load, but I can't figure out why (It is a clean
- boot, with no TSRs).
-
- I have tried to get in contact with Zeos, but haven't been able to locate
- any technicians what are free to help me with this....and nothing about it
- on the BBS of Zeos nor Adaptec.
-
- Any ideas???
- - Bruce
- --
- /--------------------------------------+--------------------------------------\
- | chengb@craft.camp.clarkson.edu | * Drama is life with the dull |
- | Home Phone: (315) 268-7798 | bits cut out. - Alfred Hitchcock |
- \--------------------------------------^--------------------------------------/
-