home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.ibm.pc.hardware:33802 comp.periphs:1697
- Path: sparky!uunet!noc.near.net!hri.com!spool.mu.edu!uwm.edu!zaphod.mps.ohio-state.edu!cs.utexas.edu!asuvax!ennews!enuxha.eas.asu.edu!gomez
- From: gomez@enuxha.eas.asu.edu (JL Gomez)
- Newsgroups: comp.sys.ibm.pc.hardware,comp.periphs
- Subject: 2 HD under 1 RLL controller
- Message-ID: <1992Dec21.012721.14134@ennews.eas.asu.edu>
- Date: 21 Dec 92 01:27:21 GMT
- Sender: news@ennews.eas.asu.edu (USENET News System)
- Followup-To: poster
- Distribution: usa
- Organization: Arizona State University
- Lines: 19
-
- What's the magic involved getting 2 Maxtor 2190's to work
- under 1 DTC 7287 RLL controller?
-
- They work fine alone. The 1st drive boots fine but the 2nd drive
- is an error.
-
- The low-level format for the 2nd drive went fine but verifying it
- made all the tracks as marked bad.
-
- DOS fdisk says it can't find the 2nd drive and AMI BIOS says it's
- an error.
-
- I did remove the terminating resistor from the first drive.
-
- Now, it's being unused.
-
- Thanks for the help!
- --
- gomez@enuxha.eas.asu.edu
-