home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!dtix!darwin.sura.net!ukma!cs.widener.edu!dsinc!ub!galileo.cc.rochester.edu!uhura.cc.rochester.edu!mjln_ltd
- From: mjln_ltd@uhura.cc.rochester.edu (Mikeey Jean Lin)
- Newsgroups: comp.sys.ibm.pc.hardware
- Subject: combining a SCSi and MFM HD
- Message-ID: <1992Dec13.214417.12188@galileo.cc.rochester.edu>
- Date: 13 Dec 92 21:44:17 GMT
- Sender: news@galileo.cc.rochester.edu
- Organization: University of Rochester - Rochester, New York
- Lines: 8
- Nntp-Posting-Host: uhura.cc.rochester.edu
-
- Hi alll,
-
- I just recently brought an used Seagate ST-296N 85 meg SCSI HD and
- an 8 bit SCSI controller that I would like to add to my system. I already
- have a Seagate ST-251-1 41 meg HD installed in my 386DX-40 with AMI BIOS.
- (upgraded from a 286) What must I do to the CMOS setup if I want to set up
- the SCSI drive as the primary drive and the MFM drive as the secondary drive?
- (or vice versa)
-