home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!dtix!oasys!lewis
- From: lewis@oasys.dt.navy.mil (William Lewis)
- Newsgroups: comp.sys.ibm.pc.games
- Subject: Re: Thrustmaster WCS/Falcon3 question
- Message-ID: <28698@oasys.dt.navy.mil>
- Date: 17 Dec 92 23:39:57 GMT
- References: <28567@oasys.dt.navy.mil> <1992Dec16.204850.25578@walter.bellcore.com>
- Reply-To: lewis@oasys.dt.navy.mil (William Lewis)
- Organization: Carderock Division, NSWC, Bethesda, MD
- Lines: 39
-
- In comp.sys.ibm.pc.games, sjs@torque.bae.bellcore.com (Stephen Szymanski) writes:
- >In article <28600@oasys.dt.navy.mil>, lewis@oasys.dt.navy.mil (William Lewis) w
- >rites:
- >|>
- >|>
- >|> I'll try this and see if it works, the book (thrustmaster) says that
- >|> I should only have dip switch 2 in the up position.
- >|>
- >|> Thanks,
- >|> Bill (lewis@oasys.dt.navy.mil)
- >
- >--
- >
- >Hmmmmm. Interesting. I just bought the WCS a couple of weeks ago,
- >and my book states 1 and 6. Make sure you are looking up Falcon 3.0
- >and not Falcon AT.
- >
- >Good Luck!
- >
- >Steve
-
- >
- Boy do I feel stupid, opened the book up and sure enough, I was lookingi
- at Falcon AT. Yes 1 and 6 DO work, 2 don't.w
-
- I guess I should live by what I say:
-
- When all else fails read the manual.
-
- Thanks anyway
- Bill
-
- =
- }/- * \
- } -- |
- }\- * /
- =
-
- (very red faced)
-