home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!pipex!warwick!uknet!strath-cs!prlhp1!pearmana
- From: pearmana@prlhp1.prl.philips.co.uk (Andy Pearman)
- Newsgroups: comp.sys.hp
- Subject: HP730 and NFS
- Message-ID: <1773@prlhp1.prl.philips.co.uk>
- Date: 15 Dec 92 14:21:03 GMT
- Reply-To: pearmana@prl.philips.co.uk
- Organization: Philips Research Laboratories, Redhill, UK
- Lines: 34
-
-
- We have an HP730 running HP-UX 8.07
- How can I fix this:
-
- I can telnet to another node on Ethernet - no problem.
- If I then pull the Ethernet plug (thin) out of the back of the HP730
- for about 30 seconds and then plug it back in again, I can no
- longer telnet to anything.
- I get the message:
-
- telnet: Unable to connect to remote host: No route to host
-
- which is a bit misleading cos the node I am telnetting to is
- on the same logical network and is the same node that was
- working prior to pulling out the cable. Anyway, netstat says
- that all the routing information is correct and re-doing any
- route statements (not that any are needed in this case) doesn't
- fix the problem.
- I am trying telnet, but I get the impression that nearly all
- IP based services have stopped working in one way or another.
-
- Rebooting the system seems to be the only way to get it working
- again.
-
- Any other system would jump back into life when you put the plug
- back in.
-
- Andy
-
- --
-
- Andy Pearman Information Technology Group , Philips Research Laboratories
- Redhill, Surrey RH1 5HA, England. Tele:0293 785544 Fax:0293 776495
- Email: pearmana@prl.philips.co.uk Seri: pearmana@prlhp0
-