home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.dec
- Path: sparky!uunet!cs.utexas.edu!usc!rpi!batcomputer!vger.cheme.cornell.edu!OLIN
- From: olin@vger.cheme.cornell.edu (Steve Thompson)
- Subject: Ultrix 4.3 / alternate console question
- Message-ID: <1992Dec18.200158.2820@tc.cornell.edu>
- Sender: news@tc.cornell.edu
- Nntp-Posting-Host: vger.cheme.cornell.edu
- Reply-To: olin@vger.cheme.cornell.edu
- Organization: Chemical Engineering, Cornell University, NY
- Date: Fri, 18 Dec 1992 20:01:58 GMT
- Lines: 16
-
- I have just installed Ultrix 4.3 on a DECstation 5000/200-PXG. When
- this system ran 4.2A, the graphics screen/keyboard was also the
- console. However, I now want to use an RS232 terminal (attached to
- the left port) as console. This appears to work fine, with the
- exception that I can get no display on the graphics screen. All the
- relevant software is installed and is running OK (yes, I have checked
- that the monitor is turned on). Anyone seen this before?
-
- Steve
-
- ---------------------------------------------------------------------------
- Steve Thompson, System Mangler Internet: thompson@cheme.cornell.edu
- School of Chemical Engineering Bitnet: thompson@crnlchme
- Olin Hall, Cornell University Phone: (607) 255 5573
- Ithaca NY 14853
- ---------------------------------------------------------------------------
-