home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #30 / NN_1992_30.iso / spool / comp / sys / atari / 8bit / 5605 < prev    next >
Encoding:
Text File  |  1992-12-16  |  2.0 KB  |  44 lines

  1. Newsgroups: comp.sys.atari.8bit
  2. Path: sparky!uunet!usc!cs.utexas.edu!uwm.edu!ux1.cso.uiuc.edu!news.iastate.edu!pv0a27.vincent.iastate.edu!tgreen
  3. From: tgreen@iastate.edu (Todd Greenfield)
  4. Subject: 800xl pbi on 1200xl (was Re: New Address...)
  5. Message-ID: <tgreen.724535645@pv0a27.vincent.iastate.edu>
  6. Sender: news@news.iastate.edu (USENET News System)
  7. Organization: Iowa State University, Ames IA
  8. References: <Dec16.054337.48996@yuma.ACNS.ColoState.EDU> <1992Dec16.171734.23386@mtu.edu>
  9. Date: Wed, 16 Dec 1992 19:54:05 GMT
  10. Lines: 32
  11.  
  12. In <1992Dec16.171734.23386@mtu.edu> jjmcwill@next3 (Jeffrey J. McWilliams) writes:
  13.  
  14. >In article <Dec16.054337.48996@yuma.ACNS.ColoState.EDU>  
  15. >spatton@lamar.ColoState.EDU (Samuel Patton) writes:
  16. >> 
  17. >> I have been seriously considering the purchase of an 800XL to get the
  18. >> Parallel Bus.  Anyone selling a bare 800XL board that I could put in 
  19. >> a PC case????
  20.  
  21. >Actually, once you've done the 800XL OS ROM upgrade to your 800XL, it isn't
  22. >much work to add a Parallel BUS.  The only problem is, you won't end up
  23. >with a 50 conductor card edge connector, you would use a header connector
  24. >or something like that instead, so a Black Box cable would need a IDC PIN 
  25. >connector crimped onto the end, next to the 50 cond. edge card connector
  26. >that comes with it.  The 1200XL motherboard is the same size as the 800XL
  27. >motherboard, I just found that out last night.  I was making measurements
  28. >for installing a XF551 3.5" drive and controller inside my 1200XL, and
  29. >had the mother board out, and compared it with my topless 800XL.
  30. >The 1200XL is bigger
  31. >because the first several inches at the front of the computer 
  32. >are empty space, the top cover comes down really low here. 
  33.  
  34. just FYI:  radio shack sells a 72 pin edge connector prototype
  35. board which can easily be cut down to 50 pins, so you could have the
  36. same connection as the 800xl.  this board also works well for
  37. connecting to the 130xe version of the pbi - just need to add
  38. a connector for cartridges.
  39.  
  40. Todd
  41. -- 
  42. Todd Greenfield
  43. tgreen@iastate.edu 
  44.