home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!uwm.edu!ogicse!news.u.washington.edu!carson.u.washington.edu!antony
- From: antony@carson.u.washington.edu (Anthony Hand)
- Newsgroups: comp.sys.apple2
- Subject: RAM CARD AUTOLOAD
- Keywords: RAM CARD AUTOLOAD AUTO LOAD
- Message-ID: <1992Dec21.020826.22552@u.washington.edu>
- Date: 21 Dec 92 02:08:26 GMT
- Article-I.D.: u.1992Dec21.020826.22552
- Sender: news@u.washington.edu (USENET News System)
- Organization: University of Washington
- Lines: 19
-
- Does anyone know of a program I could use to auto load Procomm into
- a RAM Factor card? I'm working with a student that is disabled, and
- he isn't able to do it manually. If there was a program that could
- be placed on the procomm disk that would allow others to just insert the
- disk and it would auto load onto the RAM card, this might be workable.
-
- The capabilities of Procomm would be very helpful for this severely
- disabled student.
-
- Perhaps there is a simple BASIC program that could be written that would
- do this?
-
- Thanks in advance for any help...
-
- antony
-
- antony@u.washington.edu
-
- please respond via mail as I don't normally read this forum...
-