home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.amiga.hardware:21879 comp.sys.amiga.misc:18871
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!malgudi.oar.net!hyperion!desire.wright.edu!fheitkamp
- From: fheitkamp@desire.wright.edu
- Newsgroups: comp.sys.amiga.hardware,comp.sys.amiga.misc
- Subject: Re: GVP Series 2 controller in A4000
- Message-ID: <1992Dec20.100004.6299@desire.wright.edu>
- Date: 20 Dec 92 10:00:04 EST
- References: <jKS8s*1H0@prolix.apana.org.au> <1992Dec16.181454.13559@isunix.cdx.mot.com> <11X9s*LI0@prolix.apana.org.au>
- Organization: Wright State University
- Lines: 21
-
- In article <11X9s*LI0@prolix.apana.org.au>, dac@prolix.apana.org.au (Andrew Clayton) writes:
- > In article <1992Dec16.181454.13559@isunix.cdx.mot.com>, Mark Montminy writes:
- >
- >
- > I eventually mounted my Quantum Pro 210 in the A4000, on the GVP
- > Series II card, and it works okay. A bit noisier than it was
- > though. The advice from the previous poster about backing it up
- > and reformatting in the new position, might be one I follow
- > through. Although the thought of all those floppies is just too
- > much like a headache. Better than losing data though. And I get
- > to use Amiback in anger too.
-
- Did you run any speed tests? If so, how did it do?
- >
- > Dac
- > --
- > dac@prolix.apana.org.au David Andrew Clayton. // _| _ _
- > dac@prolix.sserve.cc.adfa.oz.au Canberra, Australia \X/ (_](_](_
- > <Using ARN on an Amiga 4000. Yay!>
- Fred Heitkamp, ** Not an organization **
-
-