home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!comp.vuw.ac.nz!actrix!keith
- From: keith@actrix.gen.nz (Keith Stewart)
- Subject: Help needed with scsi problem and 2000 Repost
- Organization: Actrix Information Exchange
- Date: Fri, 18 Dec 1992 05:41:31 GMT
- Message-ID: <1992Dec18.054131.14925@actrix.gen.nz>
- Lines: 22
-
-
- I have an 40meg Quantum and 120 meg Quantum attached to my A2000 Amiga
-
- I am using A GVP Series II with 3.07 FAASSSTROM controller
- My 120 meg Quantum crashed.It is unit 2 After many attempts I have
- reformatted it
- and now it runs at approximately 50% of the previous data xfer rate
- and when useing a programme causes TurboQuantum I got the following error
-
-
- Changing Quantum DDIS parameter on gvpscsi.device unit 0 / LUN 0.
- ╖ Disable Disconnection parameter was successfully changed.
-
- Changing Quantum DDIS parameter on gvpscsi.device unit 2 / LUN 0.
- Mode Select: io_ C:28 F:0 E:42 A:0 L:30 D:$481624 O:0
- scsi_ D:$481782/8/0 C:$481642/6/6 F:2 ST:0 SD:$481682/64/0
- ERROR: Unable to change mode page.
- Quantum TurboCharge operation completed.
-
- Any help accepted with a smile :-)
-
- Keith
-