home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!pipex!doc.ic.ac.uk!uknet!axion!micromuse!brains!mick
- From: mick@genasys.co.uk
- Newsgroups: comp.sys.amiga.hardware
- Subject: Monitor Problems on A1200
- Message-ID: <1992Dec16.063704.8477@genasys.co.uk>
- Date: 16 Dec 92 06:37:04 GMT
- Sender: mick@genasys.co.uk ()
- Organization: Genasys
- Lines: 16
-
- I have recently got hold of a new A1200 and an AOC CM336 Multisync monitor
- to go with it. After finally getting hold of the little CBM adapter to go
- from the Amiga video out to the multisync cable I find that I can
- successfully display all of the AGA screen modes on my monitor. This is ok
- except that almost without exeception only a small square in the centre of
- the screen is used, I say almost because Euro-36 fills the entire screen.
- No matter how much I play with different monitors and the overscan prefs I
- cannot get it to use the full width of the screen. If anyone has any ideas
- as to how I can get around this problem I would be eternally grateful.
-
- BTW. The reason I went for the AOC as opposed to the 1960 was one of cost,
- approx #100 in favour of the AOC.
-
- Thanks in anticipation,
- --
- Michael Sheppard mick@genasys.co.uk
-