home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!spool.mu.edu!uwm.edu!ogicse!news.u.washington.edu!ns1.nodak.edu!plains!prototype!k9!doctor
- From: doctor@k9.UUCP (Paul Broe)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Parallel ports
- Message-ID: <doctor.062p@k9.UUCP>
- Date: 15 Dec 92 08:50:36 GMT
- Article-I.D.: k9.doctor.062p
- References: <memo.804151@cix.compulink.co.uk> <OD.6badnetOA92-901-302p0_55454c6a@piraya.bad.se>
- Organization: Mostly Harmless...
- Lines: 17
- X-NewsSoftware: GRn 1.16g (10.17.92) by Mike Schwartz & Michael B. Smith
-
- In article <OD.6badnetOA92-901-302p0_55454c6a@piraya.bad.se> Roger_Nordin@atb.bbs.bad.se (Roger Nordin) writes:
-
- [Stuff edited out. Chomp!]
-
- > Have a look at the MultiFaceCard2 from BSC, it has two parallel ports and two
- > high-speed serial ports. It's a Zorro II card, and you can plug in up to 8
- > cards for a maximum of 16 serial and 16 parallel ports. I have one here in my
-
- I count 5 Zorro II slots in a 2000, not sure about the 3000T mentioned in the
- edited out part, but fitting 8 cards in 5 slots would be a neat trick. :-)
-
- --
- ----
- Paul Broe
- Internet: broe@plains.nodak.edu
- UUCP: uunet!plains!prototype!k9!doctor (My Amiga 2500/20) AmigaUUCP 1.16D
- BIX: pbroe Compu$erve: too expensive. AmigaOS 2.05
-