home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!saimiri.primate.wisc.edu!sdd.hp.com!ux1.cso.uiuc.edu!cs.uiuc.edu!vela!linx!dkbsoft!dkbrown
- From: dkbrown@dkbsoft.UUCP (Dean Brown)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Piggy-Backing 2 DKB INSIDER 1MB Boards
- Distribution: world
- Message-ID: <dkbrown.001x@dkbsoft.UUCP>
- Date: 14 Dec 92 10:14:28 EDT
- Organization: DKB Software
- Lines: 29
-
- In article <2234@newsserver.cs.uwindsor.ca> peters@server.uwindsor.ca (Peter Steeves) writes:
- > DKB originally put out the INSIDER 1MB board about 5 years ago. I remember
- > hearing that two (or more) of these could be installed on an A1000. Could
- > some one please tell if this is correct and how it can be done. Also, can
- > these boards be used in an A500?
- My normal answer to the question of stacking two Insider boards is that we
- don't advertize that capability, and the board wasn't designed for it.
- Having said this, there are a number of people who went ahead and stacked
- them anyway and never reported any problems to me. (CYA mode here.) I have
- tried stacking Insiders in the A1000 and everything worked for me, but I
- can't garantee from a business perspective.
- There is no way that the Insider will fit into the A500 unless you let the
- board stick out where the keyboard would normally go. This may not be a
- problem if you are using a tower case, but for most cases you wouldn't
- want to.
- >
- > Thanks.
- > PETER
- > --
- > Peter Steeves
- > UofW
- > Windsor, Ontario, Canada
- > peters@server.uwindsor.ca
-
- --
-
-
- Dean Brown linx!dkbsoft!dkbrown@vela.acs.oakland.edu
- DKB Software
-