home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.datacomm
- Path: sparky!uunet!munnari.oz.au!metro!extro.ucc.su.OZ.AU!willw
- From: willw@extro.ucc.su.OZ.AU (William Waring)
- Subject: Re: VLT and Flow Control
- Message-ID: <1992Dec16.142611.3825@ucc.su.OZ.AU>
- Keywords: Novice Question please help
- Sender: news@ucc.su.OZ.AU
- Nntp-Posting-Host: extro.ucc.su.oz.au
- Organization: /etc/organization
- References: <85347@ut-emx.uucp>
- Date: Wed, 16 Dec 1992 14:26:11 GMT
- Lines: 19
-
- In article <85347@ut-emx.uucp> sjk@ut-emx.uucp (Phil Alvin) writes:
- >
- >I just got a V.32 BIS modem (Practical Periphreals 14400FXSA) and
- >am having a bit of trouble uploading files. The manual says to
- >check the flow control settings of my software. I am using VLT
- >5.517. How do I ensure that I am using hardware flow control and
- >what exactly does this mean?
-
- Okay, you need to first make sure that your modem knows that you want to
- use CTS/RTS handshaking. Refer to the manual of your modem to find out how
- to turn this on. One you have done that, load your terminal program and
- issue the command that will turn CTS/RTS handshaking on. Now go to your
- terminal program's configuration and look for either 'CTS/RTS' or '7-wire
- handshaking' and turn this on. you shouldn't have to do anything else.
- hope this helps.
-
- Regards,
- Eddie
-
-