home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!pipex!warwick!uknet!mucs!cs.man.ac.uk!gilbertd
- From: gilbertd@cs.man.ac.uk (David Alan Gilbert)
- Newsgroups: comp.sys.acorn.tech
- Subject: Screen goes white while accessing drive
- Message-ID: <gilbertd.724342653@cs.man.ac.uk>
- Date: 14 Dec 92 14:17:33 GMT
- Sender: news@cs.man.ac.uk
- Lines: 15
-
- Hi All, Does anyone have the same symptoms?
-
- I've got Risc OS 3.1, ARM 3 (Leading edge) Morley
- uncached SCSI card. When I copy a lot of stuff
- from floppy to hard drive in say mode 16 occasionaly
- the screen goes white for a second or two - while
- accessing the hard drive. I didnt think this
- should happen with an ARM 3 and I definitly
- thought it shouldnt happen on hard drives.
-
- Morley says it is Risc OS which does it - but I thought
- this only happened if you ran out of bandwidth or something
- similar?
-
- Any suggestions - Dave
-