home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!rpi!batcomputer!cornell!rochester!udel!intercon!psinntp!crynwr!nelson
- From: nelson@crynwr.com (Russell Nelson)
- Newsgroups: comp.protocols.tcp-ip.ibmpc
- Subject: NCSA Telnet w/ Elite16. Very Slow!
- Distribution: world
- Message-ID: <724614410snx@crynwr.com>
- References: <21400002@hpycla.kobe.hp.com>
- Date: Thu, 17 Dec 92 17:46:50 GMT
- Organization: Crynwr Software
- Lines: 18
-
- In article <21400002@hpycla.kobe.hp.com> yas@hpycla.kobe.hp.com writes:
-
- I also tried "free" packet driver "WD8003E.COM" Ver.9.7.0. by
- R.C.Clements. But it didn't work with NCSA TELNET at all.
-
- My configuration is:
- I/O Base Address = 300
- IRQ = 10
- RAM Base Address = CC000
-
- Suggestions? Thanks in advance.
-
- Sure. I'll bet that you ran it like this:
-
- wd8003e 0x60 0x300 10 0xcc000
-
- The RAM Base address only has four digits, not five.
-
- -russ <nelson@crynwr.com> What canst *thou* say?
- Crynwr Software Crynwr Software sells packet driver support.
- 11 Grant St. 315-268-1925 Voice | LPF member - ask me about
- Potsdam, NY 13676 315-268-9201 FAX | the harm software patents do.
-