home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.protocols.tcp-ip.ibmpc
- Path: sparky!uunet!mcsun!sunic!ugle.unit.no!itekiris.kjemi.unit.no!henrik
- From: henrik@itekiris.kjemi.unit.no (Henrik Gudbrandsen)
- Subject: Lantastic for tcp/ip and packet drivers
- Message-ID: <henrik.24.0@itekiris.kjemi.unit.no>
- Lines: 15
- Sender: news@ugle.unit.no (NetNews Administrator)
- Organization: SINTEF
- Date: Fri, 18 Dec 92 09:16:58 GMT
- Lines: 15
-
- I just tested Lantastic for tcp/ip and it works great with their ftp/telnet
- BUT it don't support software using packet drivers (I far as I can see).
-
- In my present setup I have 2 network cards, one for Lantastic and the other
- for packet driver (with pktmux). I had hoped Lantastic for tcp/ip used
- packet drivers so I could remove one card (this setup use memory! :-() ).
-
- The tcp/ip driveres supplied by artisoft runs on top on their netbios, is it
- possible to have some kind of packet driver on top of this drivers?
-
- Anyone got any information about this?
-
-
- Henrik Gudbrandsen
- henrik@itekiris.kjemi.unit.no
-