home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!olivea!charnel!rat!usc!news.service.uci.edu!ucivax!moe!kofax!lawnet!pride386!conexch!dugite!pete
- From: pete@dugite.UUCP (Pete Allen)
- Newsgroups: comp.protocols.snmp
- Subject: Re: snmp for traffic measurement
- Message-ID: <pete.02yw@dugite.UUCP>
- Date: 12 Dec 92 17:53:24 GMT
- References: <1992Dec10.173948.258@mvax.uakom.cs>
- Organization: Dugite Systems
- Lines: 17
-
- In article <1992Dec10.173948.258@mvax.uakom.cs> elias@mvax.uakom.cs writes:
- >
- >I would like to measure traffic between 2 ciscos on serial
- >lines and have snmp client with get set ... capability.
- >Could you advice me please what variables I should collect ?
-
- I use the Cisco 'ifinBitsSec' (or something like that). This gives you
- the BPS value for whichever interface you select, which can then be
- either graphed or dumped to a flat file for export to a spreadsheet (I
- use Excel).
-
- Hope this helps -- Pete
-
- --
- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
- Usenet : uunet!dugite!pete Pete Allen
- Packet : nl7oi @ wb6ymh.#soca.ca.usa.na Newport Beach, CA
-