home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.protocols.appletalk
- Path: sparky!uunet!cs.utexas.edu!uwm.edu!ux1.cso.uiuc.edu!news.cso.uiuc.edu!mrcnext.cso.uiuc.edu!lam
- From: lam@mrcnext.cso.uiuc.edu (Ken Lam)
- Subject: Re: CAP on SPARC2
- References: <1992Dec15.232855.19007@elroy.jpl.nasa.gov>
- Message-ID: <BzBux5.EDz@news.cso.uiuc.edu>
- Sender: usenet@news.cso.uiuc.edu (Net Noise owner)
- Organization: University of Illinois at Urbana
- Date: Wed, 16 Dec 1992 01:03:04 GMT
- Lines: 23
-
- eric@tsunami.jpl.nasa.gov (Eric Huang) writes:
-
- >Recently, I've downloaded CAP60,pl100 and installed it on the
- >SUN SPARC2 running sunos and native Ethertalk Phase 2. I am trying
- >to print from the SUN to the LaserWriter IIg, and both are connected to the
- >same Ethernet network. However I am not able to see the laserWriter when i do
- >atlook. I do see the laserwriter on a Mac's chooser which is also on the
- >same network. And on the SUN side, when i do atlook, i can see the Mac
- >and the SUN itself and the LaserWriter created by lwsrv daemon.
-
- >I have been playing around with the CAP for a while now and getting no
- >where. Any advice would be greatly appreciated.
-
- Install the patches(101-126). That should fix the problem. Thought those
- IIg/fs are really flaky in terms of non MAC compatability.
-
- --
- Ken Lam (803)-884-7615 (H)
- System Administrator (803)-792-4969 (W)
- Senior Systems Consultant (803)-792-5446(FAX)
- Netware/UNIX System Programmer/Integrator lam@jove.cofc.edu
- MultiMedia Works & Video Productions ======= Teaching the world in better ways
-
-