home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!cs.utexas.edu!asuvax!ncar!noao!arizona!sunquest!spades.aces.com!system
- From: system@spades.aces.com (SYSTEM MANAGER)
- Newsgroups: comp.os.vms
- Subject: Re: InfoServer access to Ultrix OLD
- Message-ID: <16DEC199207542520@spades.aces.com>
- Date: 16 Dec 92 14:54:00 GMT
- References: <1992Dec14.153656.1356@galaxy.gov.bc.ca> <1992Dec15.200437.24982@htlulx.htl-bw.ch>
- Sender: news@cs.arizona.edu
- Reply-To: gavron@ACES.COM
- Organization: ACES Consulting Inc.
- Lines: 43
- News-Software: VAX/VMS VNEWS 1.4-b1
-
- In article <1992Dec15.200437.24982@htlulx.htl-bw.ch>, kupfer@htlulx.htl-bw.ch (Kupferschmid Christian) writes...
- #
- #How to mount a Infoserver CD on VMS client:
- #
- #Define a service on the infoserver for each VMS OLD CD drive.
- #E.g:
- # info> create service cddoc1 for dk1:
- #You have to do this for every CD you'd like to mount. At the end enter a SAVE command to save your definitions on disk.
-
- That step is not at all necessary.
-
- #You need the infoserver client software.
- #Type
- # mc ess$ladcp bind cddoc1 /nowrite
-
- Before you do that, you ought to @sys$startup:ess$startup client
- Also, the /NOWRITE is default on a bind.
-
- The rest of the informatin is pertinent and correct:
-
- #This creats a device called DADn:
- #Now you can mount it
- #
- # mount/sys DADn: label
- #
- #Mount each CD sperately with it's own label.
- #You hav to mount it with /system so it is accessible of anyone.
- #Now you have to assign the logical DECW$BOOK to the directory [DECW$BOOK] on the OLD CD.
- # define/system DECW$BOOK DAD$CDDOC1:[DECW$BOOK],DAD$CDDOC2:[DECW$BOOK]
- #C u
- #
- #Chris
- #--
- #School of Engineering, Switzerland
- #Information Center
- #
- #HTL Brugg-Windisch |RFC-822: kupfer@htl-bw.ch
-
- Ehud
-
- --
- Ehud Gavron (EG76)
- gavron@vesta.sunquest.com
-