home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #30 / NN_1992_30.iso / spool / comp / os / os2 / misc / 39563 < prev    next >
Encoding:
Text File  |  1992-12-16  |  2.2 KB  |  63 lines

  1. Newsgroups: comp.os.os2.misc
  2. Path: sparky!uunet!spool.mu.edu!umn.edu!csus.edu!netcom.com!samiam
  3. From: samiam@netcom.com (Scott Moore)
  4. Subject: Re: How to install SBMMPM?
  5. Message-ID: <1992Dec16.070836.23819@netcom.com>
  6. Organization: Netcom - Online Communication Services  (408 241-9760 guest) 
  7. References: <19921214131439.h198@hosp.med.umich.edu> <1992Dec15.101955.3879@monu6.cc.monash.edu.au>
  8. Date: Wed, 16 Dec 1992 07:08:36 GMT
  9. Lines: 52
  10.  
  11. parry@yoyo.cc.monash.edu.au (Tom J Parry) writes:
  12.  
  13.  
  14. >Anybody know how to play a CD through the SB though? I don't want to keep
  15. >on switching my speakers from the CD drive speaker plug to my SB output.
  16. >I'd rather like to leave them plugged into the SB permanently and send all
  17. >sounds out of them.
  18.  
  19. Boy, are we on the same wavelength or what ? I just solved that problem 
  20. yesterday !
  21. Ill describe the fix for the toshiba, but it can work for any drive:
  22.  
  23. The plug on the SB card looks like :
  24.  
  25.      ---     ---
  26.      | 1 2 3 4 |
  27.      -----------
  28.  
  29. 1 = ground
  30. 2 = left channel
  31. 3 = ground
  32. 4 = right channel
  33.  
  34. Get the cable from creative labs for their own CD ($6.00) direct from CL.
  35. Use a small screw driver to remove the leads from one end, and plug the other
  36. into the blaster. Your free end should now be:
  37.  
  38. white = left
  39. black = ground
  40. red = right
  41.  
  42. Find the output connector on the back of your CD (the audio output !). Find
  43. the pinout in the manual (or get it from the maker). You should be able to 
  44. just slide the connectors from the SB cable onto the male pins. Worst case,
  45. you would have to cut the ends and solder them on. Be sure that you dont have
  46. a short resulting from the bare pins touching (use tape if required).
  47. Note: if you don't have any connector for audio on the back, you can solder
  48. directly to the back of the headphone jack in the front (requires opening
  49. the unit).
  50. Note: don't do this on Creative labs own CD ! RDFM !
  51.  
  52. Works great as decribed on a toshiba 3301 CD rom drive (the recommended
  53. os/2 2.0 drive).
  54.  
  55.                                   GOOD LUCK ! [sam]
  56.  
  57. -- 
  58. Scott A. Moore [SAM]  | "Cash is more 
  59. samiam@netcom.com     | important than your 
  60. Santa Cruz, CA USA    | mother"
  61. 408-423-1624          | Allan Shugart - CEO Segate Corp.
  62. ------------------------------------------------------------------------
  63.