home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!b61442.STUDENT.CWRU.Edu!sal8
- From: sal8@po.cwru.edu (Steve Luzynski)
- Newsgroups: comp.os.os2.misc
- Subject: Re: where should SET name=thing go?
- Date: Mon, 14 Dec 1992 05:59:56 GMT
- Organization: Case Western Reserve University
- Lines: 21
- Message-ID: <sal8.251.724312796@po.cwru.edu>
- References: <Bz8HIA.B9M@knot.ccs.queensu.ca>
- NNTP-Posting-Host: b61442.student.cwru.edu
-
- In article <Bz8HIA.B9M@knot.ccs.queensu.ca> calvert@QueensU.CA (John Calvert) writes:
- >From: calvert@QueensU.CA (John Calvert)
- >Subject: where should SET name=thing go?
- >Date: Mon, 14 Dec 1992 05:20:34 GMT
- >The online docs say that SET commands should go in the CONFIG.SYS file,
- >(unlike under DOS), but there are still several in the AUTOEXEC.BAT
- >created by the installation. Does it matter?
- >
- >John Calvert
- >calvert@mast.queensu.ca
-
- Depends on what you need to see the commands in. Put them in autoexec for
- DOS windows and in config.sys for OS/2 windows.
-
- ----------------------------------------------------------------------------
- steve luzynski @ case western reserve university in cleveland, oh
- sal8@po.cwru.edu | voice calls cheerlessly accepted at x2153.
- ----------------------------------------------------------------------------
- happy people are deluding themselves that there is nothing wrong.
- ----------------------------------------------------------------------------
- life is but a series of bitter dissapointments.
-