home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.os2.apps
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!darwin.sura.net!news.duc.auburn.edu!harriga
- From: harriga@duc.auburn.edu (Greg A. Harris)
- Subject: Re: CKermit - help!
- Message-ID: <harriga.921212220925@lab1.duc.auburn.edu>
- Sender: usenet@news.duc.auburn.edu (News Account)
- Nntp-Posting-Host: lab1.duc.auburn.edu
- Organization: Auburn University, Alabama
- References: <harriga.921212121303@lab1.duc.auburn.edu> <1992Dec12.202337.16896@ousrvr.oulu.fi> <harriga.921212210854@lab1.duc.auburn.edu>
- Date: Sun, 13 Dec 1992 04:09:26 GMT
- Lines: 14
-
- >In article <1992Dec12.202337.16896@ousrvr.oulu.fi> ojtv@zombie.oulu.fi (Olli Vuolteenaho) writes:
- >>In C-Kermit 179 (and in the MS-kermits I've been using)
- >>you actually (c)onnect before you dial (or so I did 2 min ago). Ver 188,
- >>however, seems to work differently.
-
- In looking over this again, it appears that your carrier detect must not
- be correct. I do not think you should be able to "connect" until there
- is a carrier (I can't). Do you have your modem set to always show the
- carrier on (this can be done with the &C0 command in hayes, or with a
- dip switch on some modems)? My carrier detect follows the carrier signal.
-
- --Darrel Hankerson hank@ducvax.auburn.edu
-
-
-