home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.ms-windows.setup
- Path: sparky!uunet!wupost!spool.mu.edu!umn.edu!bru!cvdv99.mayo.edu!fisk
- From: fisk@cvdv99.mayo.edu (Tom Fisk | 2D-337 STM | 5-4341)
- Subject: ATI Grahics Ultra Pro and system mem limitation
- Message-ID: <13DEC199215195349@cvdv99.mayo.edu>
- News-Software: VAX/VMS VNEWS 1.41
- Sender: newsman@bmw.mayo.edu (/home/bmw/usenet)
- Reply-To: fisk@mayo.edu
- Organization: University of Arizona MIS Department - Mosaic Group
- Date: 13 Dec 1992 15:19 -0700
- Lines: 19
-
- We just installed an ATI Graphics Ultra Pro w/2mb into an ISA machine that
- has 16mb of memory. We then configured windows to use the driver that came
- with the ATI card. When we restarted windows it said we had to turn on the
- memory apeture...so went to the MACH32 directory and ran install. It shows
- 16mb as system memory and will not allow us to configure the memory apeture
- above 16mb.
-
- So what is the deal, the manual says that the board will not work with 16mb
- of memory. Will it work with more? Or is this ATI card slightly retarded
- and can't count past 16mb? We can put up to 32mb of memory into the system
- (it is a 486 2-66).
-
- -------------------------------------------------------------------------------
- Thomas B. Fisk +----------------------------+ Internet: fisk@mayo.edu
- Mayo Clinic | If you don't know where | Voice: (507) 255-4341
- 200 First Street SW | you're going you'll never | FAX: (507) 255-5484
- Mail Stop 2D-337 STM | get there. |
- Rochester, MN 55905 +----------------------------+
- -------------------------------------------------------------------------------
-