home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.sys.cisco
- Path: sparky!uunet!cs.utexas.edu!sdd.hp.com!elroy.jpl.nasa.gov!decwrl!synseer!synseer!billp
- From: billp@Syntex.COM (Bill Putney)
- Subject: Re: Backbone in a box: how to mount all tho
- Message-ID: <1992Dec16.164018.7753@synseer.Syntex.COM>
- Sender: usenet@synseer.Syntex.COM
- Nntp-Posting-Host: synseer
- Reply-To: billp@Syntex.COM
- Organization: Syntex U.S.A. - Palo Alto, CA
- References: <Bz9qu3.7Jw@usenet.ucs.indiana.edu>
- Date: Wed, 16 Dec 1992 16:40:18 GMT
- Lines: 35
-
- In article 7Jw@usenet.ucs.indiana.edu, sweeny@bronze.ucs.indiana.edu (Brent Sweeny) writes:
- >We (Indiana University) have grappled with this problem too, with 6 very-full
- >AGS+s in 3 racks (the room from which the fiber goes to all of our campus
- >buildings only reluctantly gave us room for 3 racks, so we had to fill them
- >as efficiently as possible!) We also looked for rackmounted AUI-to-FOIRL
- >transceivers, but couldn't find what we wanted: primarily small width, with
- >LEDs on the opposite end of the AUI connector (so we could see them easily).
- >
- > ...
- > Brent Sweeny
- > Indiana University Computing Services
- > sweeny@indiana.edu
- >
-
- We had this same problem and Canary Communications is building rack
- mounted FOIRL tranceivers for us (I think they are adding them to the
- general offering).
-
- FYI - Canary Communications, Inc.
- 1851 Zanker Road
- San Jose, CA 95112-4213
- Ph: (408) 453-9201
-
- - Bill
-
-
- ---
- =====================================================================
- # Bill Putney - WB6RFW | billp@Syntex.COM #
- # Syntex U.S.A. | {oliveb|decwrk}!synseer!billp #
- # M.S. A5-6 |--------------------------------#
- # 3401 Hillview Ave. | P.O.T.S. (415) 855-1259 #
- # Palo Alto, CA 94303 | FAX (415) 855-5301 #
- =====================================================================
-
-