home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.dcom.modems:18133 comp.unix.ultrix:8884
- Path: sparky!uunet!noc.near.net!hri.com!spool.mu.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!darwin.sura.net!ra!wintermute.phys.psu.edu!leps5.phys.psu.edu!kenh
- From: kenh@leps5.phys.psu.edu (Ken Hornstein)
- Newsgroups: comp.dcom.modems,comp.unix.ultrix
- Subject: Re: Problems with Ultrix /etc/acucap and Telebit QBlazer
- Message-ID: <1gl03cINNd5h@wintermute.phys.psu.edu>
- Date: 15 Dec 92 16:11:24 GMT
- References: <1992Dec8.120719.12081@jarvis.csri.toronto.edu> <1992Dec14.235701.9945@netcom.com>
- Distribution: na
- Organization: Penn State, Laboratory for Elementary Particle Science
- Lines: 24
- Nntp-Posting-Host: leps5.phys.psu.edu
-
- In article <1992Dec14.235701.9945@netcom.com> gerg@netcom.com (Greg Andrews) writes:
- >irving@sys.toronto.edu (Irving Reid) writes:
- >>I am having no end of trouble getting an /etc/acucap entry written so
- >>that my Decstation 3100 will dial out on a TBit QBlazer. The closest
- >>that Telebit support could get was some advice for older VaxStations,
- >>from which I got the acucap entry
- >>
- >>tb9600|telebit|Telebit modem 9600 baud, Touch tone :\
- >> :db:cr:hu:ls:re:ss=\dA\dA\dATZ\r:sr=OK:sd#250000:di=ATDT:dt=\r:\
- >> :dd#50000:fd#80:rs=,:os=CONNECT:ds=\dA\dA\dATZ\r:ab=\dA\dA\dATZ\r:
- >>
- >>I am using a DEC H8571-F cable, which gives only TX, RX, ground, DSR, and DTR,
- >>which is all you can get on a DS 3100 (sigh. When will they learn?)
- >>
- >>The calling sequence runs correctly right up until the number is dialed.
- >>As soon as the dialing starts, tip rushes on and decides it has carrier
- >>and that the response it wanted didn't come; it then gives up and hangs up
- >>just as the other end answers.
-
- I had similar problems with tip on our 3100. Except that my biggest problem
- was that tip would just exit with no error message. It liked to dump core
- a lot too when certain (legal) entries were put in /etc/acucap.
-
- --Ken
-