home *** CD-ROM | disk | FTP | other *** search
- Comments: Gated by NETNEWS@AUVM.AMERICAN.EDU
- Path: sparky!uunet!paladin.american.edu!auvm!PITTVMS.BITNET!ERCOUPE
- X-Envelope-to: notis-l@TCSVM.BITNET
- X-VMS-To: IN%"notis-l@tcsvm"
- Message-ID: <01GSEFC00BHC94EXEH@vms.cis.pitt.edu>
- Newsgroups: bit.listserv.notis-l
- Date: Wed, 16 Dec 1992 22:53:00 EST
- Sender: NOTIS discussion group list <NOTIS-L@TCSVM.BITNET>
- From: "W.C. (RUSTY) DIVENS" <ERCOUPE@PITTVMS.BITNET>
- Subject: Question for the hardware techno-wizards
- Lines: 20
-
- A Happy Holidays to all in NOTIS-L land.
-
- Rusty needs some information, so as to keep him out of trouble
- between Christmas and New Years, and enable him to continue
- working on his pet project.
-
- Does anyone out there have the ASCII code (digital or hex) that
- sends the CAERE barcode scanner wand into SETUP or REMOTE mode?
- As some know, you wand a barcode in the INSTALLATION and PROGRAMMING
- GUIDE to enter the 'remote' mode and set the parameters for the
- scanner. You know, stuff like a <CR> for a postamble, the kinds
- of barcodes used, etc. Well, the ENTER and ENTER REMOTE barcodes
- are the only ones that do not have the ASCII representation printed
- above them. Of course, when scanned, they do not print out on the
- screen, so that option is a bust.
-
- Should anyone be able to provide me with this information, I can
- promise a round or two at my expense at NUGM 93.
-
- Rusty
-