home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!uwm.edu!psuvax1!psuvm!n42
- Organization: Penn State University
- Date: Wed, 18 Nov 1992 23:36:06 EST
- From: <N42@psuvm.psu.edu>
- Message-ID: <92323.233606N42@psuvm.psu.edu>
- Newsgroups: rec.models.rc
- Subject: Re: Another Fiberglassing Question....
- References: <27499@oasys.dt.navy.mil> <1992Nov16.162843.26528@informix.com>
- Lines: 5
-
- Again, use wax paper on the outer surface. It will not only produce a smooth
- surface but will help in holding down the cloth and give you the opportunity(sp
- ) to squish any excess epoxy out of the glass. I define excess epoxy as any
- amount of liquid that you can displace with a finger or roller>
- Regards Scott Gregory
-