home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.amiga
- Path: sparky!uunet!infonode!lovealld
- From: lovealld@infonode.ingr.com (David Loveall)
- Subject: Re: New Serial Driver code from Keith G. et al.
- Message-ID: <1992Nov22.033107.18269@infonode.ingr.com>
- Reply-To: dave@xanadu.reston.ingr.com
- Organization: Intergraph Corp. Federal Systems Division, Reston VA
- References: <BxtMo3.4uL@aplcenmp.apl.jhu.edu>
- Date: Sun, 22 Nov 1992 03:31:07 GMT
- Lines: 27
-
- In <BxtMo3.4uL@aplcenmp.apl.jhu.edu> robbar@aplcenmp.apl.jhu.edu (N Baruch robert alla) writes:
-
- >I pulled down the serial driver code that Keith posted, added it to
- >the /usr/sys/amiga/driver directory and rebuilt the kernel.
-
- >The code would lock up the machine hard when I attempt to access the
- >serial line from Kermit. Keith's advice to keep the original source
- >files came in handy! Needless to say, I restored the kernel to
- >its original state.
-
- >Did I miss something? Is/Did anyone else experience problems with
- >this source code?
-
- Me too :-(. One character echoed through kermit, then system lockup. I
- don't have the multi-port card, so I have no choice other than /dev/term/ser..
-
- >I'm running Amiga Unix 2.03
-
- A2500/30, Amiga Unix 2.1p2a...
-
- >Robert Baruch
-
- --
- David Loveall | "Dante's Inferno ?? --
- Intergraph Corp, Reston VA | It looks more like _Disco_
- dave@xanadu.reston.ingr.com | Inferno......"
- ..uunet!ingr!reston!xanadu!dave | - MST 3K
-