home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!usc!hacgate!shef
- From: shef@ipla01.hac.com (Ian B. Shef)
- Newsgroups: comp.sys.novell
- Subject: Re: Getting CUTCP or NCSA telnet to work with ODI driver
- Message-ID: <24109@hacgate.SCG.HAC.COM>
- Date: 20 Nov 92 18:20:05 GMT
- References: <1992Nov17.190038.14729@ucsu.Colorado.EDU>
- Sender: news@hacgate.SCG.HAC.COM
- Organization: Hughes Missile Systems Co., Canoga Park, CA.
- Lines: 22
-
- In article <1992Nov17.190038.14729@ucsu.Colorado.EDU> barr@tramp.Colorado.EDU (BARR DOUG) writes:
- >I have a board that has an ODI driver with it. No packet driver is available.
- >We have access to CUTCP telnet, which normally uses a packet driver. Is there
- >an interface between these? If so where do I get it?
-
- I use NCSA telnet, which normally uses a packet driver. To interface to
- the ODI driver for my board I use ODIPKT, which is a "shim" between
- packet driver applications and ODI drivers. I am using version 1.1 .
- The author gives his address two ways: ddl@harvard.harvard.edu and
- ddl@das.harvard.edu .
-
- I'm not sure where I got my copy, but probably wuarchive.wustl.edu .
- Consult the archie server for more information.
-
- Good Luck,
- Ian
-
- --
- Ian Shef 262/C58 0070326@ccmail.emis.hac.com or shef@ipla01.hac.com
- Hughes Missile Systems Co. uucp: ...!usc!hacgate!ipla01!shef (maybe?)
- P.O. Box 7928 phone: 818-702-4365
- Canoga Park, CA 91309-7928 Any opinions expressed are author's own.
-