home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!uwm.edu!biosci!ucselx!crash!photon.photon.com!juanman
- From: juanman@photon.com (Juan Castaneda)
- Newsgroups: comp.sys.novell
- Subject: Workstation Error w/SysCon & FConsole
- Message-ID: <1992Nov19.002112.20070@photon.com>
- Date: 19 Nov 92 00:21:12 GMT
- Sender: usenet@photon.com (Usenet dummy users)
- Organization: Photon Research Associates, Inc.
- Lines: 19
- X-Newsreader: TIN [version 1.1 PL6]
-
-
- Question: I am getting the following error when trying to run
- SysCon & FConsole from one specific workstation under ver. 3.11:
-
- "run-time error R6002
- - floating point not loaded"
-
- The PC is a 386-25MHZ and I have already tried replacing the NIC.
- I've been able to run these two utilities a couple of times, but
- this is only about 5% of the time.
-
- Any tips or insight would be greatly appreciated.
-
- Thanks in advance,
-
-
- Juan Manuel Castaneda
- Photon Research Associates, Inc.
- La Jolla, California
-