home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.mac.hardware:22136 comp.sys.ibm.pc.hardware:30551
- Newsgroups: comp.sys.mac.hardware,comp.sys.ibm.pc.hardware
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!news.columbia.edu!cunixf.cc.columbia.edu!rs54
- From: rs54@cunixf.cc.columbia.edu (Richard Sucgang)
- Subject: Re: Upgrading a Laser Printer
- Message-ID: <1992Nov21.201430.5376@news.columbia.edu>
- Sender: usenet@news.columbia.edu (The Network News)
- Nntp-Posting-Host: cunixf.cc.columbia.edu
- Reply-To: rs54@cunixf.cc.columbia.edu (Richard Sucgang)
- Organization: Columbia University
- References: <1992Nov19.011758.8104@rock.concert.net> <1992Nov19.224216.856@blurt.oswego.edu>
- Date: Sat, 21 Nov 1992 20:14:30 GMT
- Lines: 11
-
- There is a book called How to build your own PostScript Laser Printer
- and save a bundle. I forget the author, its at home. I read it, though,
- and it explains very well how a laser printer is put together, but the
- PostScript part relies heavily on an Apple LaserWriter controller board
- that was taken from a lobotomized printer. No explanations on
- how to make the board, just: If you can't get this board, well, we can't
- get anywhere, now can we?
-
-
- -rich
- rs54@cunixf.cc.columbia.edu
-