home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!dtix!darwin.sura.net!mlb.semi.harris.com!controls.ccd.harris.com!ecg
- From: ecg@controls.ccd.harris.com (Eric Graves)
- Newsgroups: comp.sys.ibm.pc.hardware
- Subject: Diamond SpeedStar 24X and CS1024ni
- Message-ID: <1992Nov21.175553.12197@ccd.harris.com>
- Date: 21 Nov 92 17:55:53 GMT
- Sender: ecg@controls (Eric Graves)
- Organization: Harris Controls
- Lines: 23
- Originator: ecg@sp1
-
-
- Has anybody successfully used the Speedstar 24X with
- a Crystal Scan 1024ni (Gateway 2000) in 800x600x32k mode
- under MS Windows 3.1?
-
- I can get the other 800x600 modes to work. In fact I
- can all other modes to work. However, when I switch
- to 32k colors, the timing gets messed up and I get
- static all over the screen.
-
- If somebody can correctly use this mode, I would
- appreciate some e-mail with your timing settings,
- dip-switch settings, jumper settings, and anything
- else that might be helpful.
-
- Thanks in advance,
- Eric C. Graves
- ecg@controls.ccd.harris.com
-
- --
- Eric C. Graves
- ecg@controls.ccd.harris.com
- Standard Disclaimers Apply
-