home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!spool.mu.edu!umn.edu!mmm.serc.3m.com!mmc.mmmg.com!timbuk.cray.com!shamash!uc.msc.edu!apctrc!shimoda!zrde05
- From: zrde05@trc.amoco.com (Robert D. Ess)
- Newsgroups: comp.sys.hp
- Subject: Re: Correct way to set up terminal type on
- Message-ID: <By6K2z.9so@trc.amoco.com>
- Date: 23 Nov 92 17:47:22 GMT
- References: <41188@sdcc12.ucsd.edu>
- Sender: usenet@trc.amoco.com
- Reply-To: zrde05@trc.amoco.com
- Organization: Amoco Production Company, Tulsa Research
- Lines: 23
-
- In article 41188@sdcc12.ucsd.edu, xm9@sdcc12.ucsd.edu (richard g. adair) writes:
- >In article <cjw.722048358@moo.acns.nwu.edu> cjw@moo.acns.nwu.edu (Christopher Wargaski) writes:
- >>ericw@asihub.sd.cadence.com (Eric D. Williams) writes:
- >>> I have a pretty basic problem (which is not in the FAQ):
- >>> I'm sitting in front of a Sun/DEC/Mips/IBM, running X.
- >>> I use xterms.
- >>> I rlogin into an HP 9000/710.
- >
- >If it hurts, don't do that! :-). Try this instead: issue a command
- >from the sun like "rsh hpname xterm -ls -display hpname:0.0" instead
-
- One caveat to this approach: be sure the Sun xnews server is at patch level
- 26 or better or you will wait anywhere from 5 to 15 minutes for the hpterm to
- pop up.
-
-
- --- * ---
- Robert Ess voice : 918-660-3638
- Computing Research fax : 918-660-4163
- Amoco Production Research email :ess@trc.amoco.com
- --- * ---
-
-
-