home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.apple2
- Path: sparky!uunet!cs.utexas.edu!sun-barr!ames!purdue!mentor.cc.purdue.edu!noose.ecn.purdue.edu!roby.ecn.purdue.edu!platkus
- From: platkus@roby.ecn.purdue.edu (Shawn W Platkus)
- Subject: Re: GS Setup (slots)
- Message-ID: <platkus.722365310@roby.ecn.purdue.edu>
- Sender: news@noose.ecn.purdue.edu (USENET news)
- Organization: Purdue University Engineering Computer Network
- References: <By1IA5.9pr@rice.edu>
- Date: 21 Nov 92 17:01:50 GMT
- Lines: 36
-
- jimwong@owlnet.rice.edu (Jim Wong) writes:
-
- >Is there any way I can connect a modem to my system without losing
- >access to my printer or hard disk? My setup is as follows:
-
- >Slot Control Panel Setting Slot Contains
- >1 Printer Port <nothing>
- >2 Your Card Apple High Speed SCSI
- >3 80 Column Firmware <nothing>
- >4 Mouse <nothing>
- >5 SmartPort <nothing>
- >6 Drive Port <nothing>
- >7 AppleTalk MDIdeas Stero Card
-
- >Could I drop a serial card in one of my empty slots without losing access
- >to the functionality of the "internal" slot?
- >--
- >Jim Wong (jimwong@owlnet.rice.edu)
-
-
- Unless you are using AppleTalk, you could put your HD in slot seven, and then
- put your stereo card in any available slot. The stereo card could go in
- slot 2, and you could still you the modem port.
-
- I have my FutureSound board in slot 6, and I and just switch the control panel
- setting to drive port when I need to use the 5.25. THe only time I need
- it set to your card is when I digitize sound. The stereo output doesn't
- depend on the slot setting.
-
- -Shawn
-
- --
- _______ __ _____ ________ __ _ __ __ ______
- \\// _ // || // || | || | || // || || // @ecn.purdue.edu
- //____// ||_ //===||_ ||_ ||<< ||_ ||_ /=====/
- _//_ _||/__/ _// _||/ _||/_ _|| \\_ _||/___||/ _____//
-