home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.apple2
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!destroyer!cs.ubc.ca!uw-beaver!newsfeed.rice.edu!rice!jimwong
- From: jimwong@owlnet.rice.edu (Jim Wong)
- Subject: Re: GS Setup (slots)
- Message-ID: <By20HE.CKC@rice.edu>
- Sender: news@rice.edu (News)
- Organization: Rice University
- References: <By1IA5.9pr@rice.edu> <1992Nov21.055529.5596@zip.eecs.umich.edu>
- Date: Sat, 21 Nov 1992 06:53:38 GMT
- Lines: 20
-
- In article <1992Nov21.055529.5596@zip.eecs.umich.edu> grover@emunix.emich.edu (Grover Thomas) writes:
- >
- >Your best bet is probably to move the stereo card to slot 6, and put
- >your SCSI card in slot 7. I'm not too familiar with the MDIdeas card,
- >but it should still output fine. To digitize, you will lose the
- >functionality of your 5.25" drives (by setting slot 6 to "your card")
- >but that is usually not a big loss.
- >--
-
- What would happen if neither the DuoDisk nor the 3.5 Drive had disks
- in them -- would the computer start scanning from 7->0, and find
- the hard disk then?
-
- (I like having the computer check the floppy drives and then boot the
- hard disk...)
-
- --
- Jim Wong (jimwong@owlnet.rice.edu)
-
-
-