home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!usc!zaphod.mps.ohio-state.edu!rpi!psinntp!psinntp!ncrlnk!ncr-mpd!kentd
- From: kentd@FtCollins.NCR.com (Kent Dalton)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: A4000 and CDrom (aka IDE blows) (was Re: IDE : Possible
- Message-ID: <KENTD.92Nov17103258@zappa.FtCollins.NCR.com>
- Date: 17 Nov 92 10:32:58 GMT
- References: <1992Nov11.140203.23825@zds-oem.zds.com>
- <OD.6badnetOA92-901-302p0_5383ab65@piraya.bad.se>
- Sender: uucp@ncr-mpd.FtCollinsCO.NCR.COM
- Distribution: world
- Organization: NCR Microelectronics, Ft. Collins, CO
- Lines: 18
- In-reply-to: Roger_Nordin@atb.bbs.bad.se's message of 15 Nov 92 15:39:32 GMT
-
- >>>>> On 15 Nov 92 15:39:32 GMT, Roger_Nordin@atb.bbs.bad.se (Roger Nordin) said:
-
- > You all act like you can't stick your SCSI controllers in the 4000.
-
- Roger> Well, in some cases you can't. The A2091 will not work the A4000
-
- I can't either, since my SCSI controller is on my 3000's MOTHERBOARD.
- (IMHO, the lack of SCSI is a far worse problem than AGA's requirements for
- the wide range of monitor scan rates.)
-
- --
- /**************************************************************************/
- /* Kent Dalton * EMail: Kent.Dalton@FtCollinsCO.NCR.COM */
- /* NCR Microelectronics * Phone: (303) 223-5100 X-319 */
- /* 2001 Danfield Ct. MS470A * FAX: (303) 226-9556 */
- /* Fort Collins, Colorado 80525 * */
- /**************************************************************************/
- HELLO, everybody, I'm a HUMAN!!
-