home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!sdd.hp.com!swrinde!swrinde.nde.swri.edu!kent
- From: kent@swrinde.nde.swri.edu (Kent D. Polk)
- Newsgroups: comp.sys.amiga.graphics
- Subject: Re: A4000 display placement
- Date: 23 Nov 1992 15:29:39 GMT
- Organization: Southwest Research Institute, San Antonio, Texas
- Lines: 18
- Message-ID: <1eqtd3INNp6u@swrinde.nde.swri.edu>
- References: <Ef0yLDi00VozQ37mJH@andrew.cmu.edu> <1497@cbmnl.nl.so.commodore.com>
- NNTP-Posting-Host: swrinde.nde.swri.edu
-
- In article <1497@cbmnl.nl.so.commodore.com> heuvdp@cbmnl.nl.so.commodore.com (Paul Heu vd Netherlands) writes:
- >bo24+@andrew.cmu.edu (Berend Ozceri) writes:
- [...]
- >> However, I noticed one problem (irritation): The DblNTSC mode shows way
- >> to much to the right on my C1960 monitor. Even if I turn the horizontal
- >
- >Have you installed the VGAONLY executable in devs:monitors??
- >If not do this and reboot. This should fix the problem.
-
- I wouldn't say it 'fixes the problem'... VGAONLY simply allows me to use my
- Mitsubishi 16" Diamondscan with something other than MULTISCAN.
-
- It still takes ~20 seconds to sync to the signal and leaves a 2" left margin
- on the display instead of a 3" margin.
-
- Kent Polk: Southwest Research Institute
- Internet : kent@swrinde.nde.swri.edu
- UUCP : $ {cs.utexas.edu, gatech!petro, sun!texsun}!swrinde!kent
-