home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.applications
- Path: sparky!uunet!cs.utexas.edu!swrinde!emory!wupost!gumby!destroyer!news.iastate.edu!isuvax.iastate.edu!TAA33
- From: taa33@isuvax.iastate.edu (Devin E. Parsons)
- Subject: Re: Final Copy and Super DJ
- Message-ID: <Bxzpyw.54r@news.iastate.edu>
- Sender: news@news.iastate.edu (USENET News System)
- Reply-To: taa33@isuvax.iastate.edu
- Organization: Iowa State University, Ames, Iowa
- References: <wfaust.091a@venus.adsp.sub.org> <1992Nov17.184842.1242@galaxy.gov.bc.ca>,<1992Nov19.015100.15509@nynexst.com>
- Date: Fri, 20 Nov 1992 01:11:18 GMT
- Lines: 51
-
- In article <1992Nov19.015100.15509@nynexst.com>, clare@nynexst.com (Clare Chu) writes:
- >In article <1992Nov17.184842.1242@galaxy.gov.bc.ca> EWILTS@GALAXY.GOV.BC.CA writes:
- >>>
- >>> There are several solutions on how to avoid the shift of graphic
- >>> output:
- >>>
- >>
- >>I've just tried this to see if it also resolves my problem with Final Copy II
- >>and the Super_DJ driver. It doesn't. My first page is fine, then I get a
- >>blank page, then the 3rd page (actually the 2nd printed page) starts
- >>immediately at the top of the physical page with no top margin. I didn't even
- >>think the DJ 500 was capable of printing with no top margin!
- >>
- >>I would really appreciate someone's settings for FC II, Super_DJ, and DJ Helper
- >>preferences (if it's used). I had everything set up properly for QuickWrite
- >>and then purchased FinalCopy II and haven't got a perfect match yet. Any ideas
- >>would be *greatly* appreciated!
- >>
- 7>
- > Sorry I can't help. I suggest going back to the default Commodore
- > supplied DeskJet driver since it works well for me with Final Copy.
- > I don't use Super_DJ or DJ Helper with Final Copy because of all the
- > tinkering. To tell the truth, I don't use DJ Helper or Super_DJ
- > at all and use the Commodore supplied driver. I have no problems
- > with shifted pages or graphics being shifted. I think you need to
- > set the Page SetUp in Final Copy for the DeskJet because they are
- > set to the LaserJet. Look on page 4-3 of the Final Copy II manual
- > for the settings of print area. It says that you might get an
- > extra blank page if the print area or page type are not defined
- > correctly.
-
- I have the JD_Helper software and I have been able to correctly config. it
- to work with FCII. Here are the settings I use:::
-
- Every text formatiing switch in the DJ_Helper is set to off. (Text scale,
- perf skip, ect...) With the Preferences settings I have:::
-
- The Single/Fanfold set to Fanfold.
-
- With FCII I have:::
-
- The Silgle/Cont. switch set to SINGLE!!
-
- This config. works great for me, but any other combination will give me
- a blank page...BTW I do see a %10-%15 increase in printing speed
- *******************************************************************************
- ** Devin E. Parsons / / **
- ** Friley 4543 \ / / **
- ** Iowa State University -VOICE 515-294-3096 \ \/ / **
- ** Ames, Iowa 50012-0001 -E-mail TAA33@ISUVAX.EDU \/\/ Only Amiga! **
- *******************************************************************************
-