home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.os2.apps
- Path: sparky!uunet!cs.utexas.edu!sdd.hp.com!elroy.jpl.nasa.gov!kilroy!hartzman
- From: hartzman@kilroy.Jpl.Nasa.Gov (Les Hartzman)
- Subject: Re: EZTAPE/PM FROM MAYNARD(IRWIN) INFORMATION!!!!
- Message-ID: <1992Nov21.005549.10977@elroy.jpl.nasa.gov>
- Followup-To: hartzman@kilroy.jpl.nasa.gov
- Keywords: EZTAPE/PM, CSD
- Sender: Les Hartzman
- Nntp-Posting-Host: kilroy.jpl.nasa.gov
- Organization: Jet Propulsion Laboratory, Pasadena, CA
- Date: Sat, 21 Nov 1992 00:55:49 GMT
- Lines: 30
-
- Is anyone else having problems using the new EZTAPE/PM software since the
- installation of the CSD?
-
- Tech support had me try a number of different options for their device driver,
- none of which worked.
-
- I finally got Irwin/Maynard to say that others who had working systems before
- the CSD now are having problems. If anyone else is having problems since
- installing the CSD, PLEASE call it in to Maynard (800-541-3330) and report the
- problem. When you report the problem, make sure you tell them if you're using
- an MCA machine or a standard ISA one. For the MCA machines, IBM2FLPY.ADD is
- used, but IBM1FLPY.ADD is used for non-MCA machines. They had a hard time
- understanding this!
-
- I'm running off of an IDE controller and one tech was trying to get be to use
- their 4100 controller, or to buy a different IDE controller. If you are
- having problems running off of the floppy controller, tell them what the brand
- is. Mine is a UMC. I refuse to change until they make a final determination
- as to what the problem is (they JUST installed the CSD yesterday!).
-
- The only thing I have left to try is to remove the hardcard driver (Quantum)
- from my config.sys and see if that makes a difference.
-
-
- Thanks.
-
- --
- Les Hartzman hartzman@kilroy.jpl.nasa.gov
- Jet Propulsion Laboratory M/S 238-528 (818) 354-5964
- 4800 Oak Grove Dr., Pasadena, CA. 91109
-