home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!usc!sdd.hp.com!think.com!rpi!zaphod.mps.ohio-state.edu!cs.utexas.edu!sun-barr!ames!haven.umd.edu!darwin.sura.net!jvnc.net!netnews.upenn.edu!msuinfo!news
- From: carter@cemvax.cem.msu.edu (Tom Carter)
- Newsgroups: comp.os.ms-windows.apps
- Subject: re: WINQVT3.03 problems
- Message-ID: <1992Nov23.134734.19686@msuinfo.cl.msu.edu>
- Date: 23 Nov 92 13:47:34 GMT
- References: <14NOV199221235291@bpavms.bpa.arizona.edu>
- Sender: news@msuinfo.cl.msu.edu
- Organization: Michigan State University, Chemistry Dept., E. Lansing, MI
- Lines: 47
-
- In article <14NOV199221235291@bpavms.bpa.arizona.edu> dmittleman@bpavms.bpa.arizona.edu (Daniel Mittleman) writes:
- > I downloaded WINQVT3.03 from CICA today and tried to install it. I ran
- > into considerable problems which I have not completely tracked down. I
- > have given up and have decided that I am happy enough with 2.8 until
- > the bugs are all out of 3.0
- >
- > I run NDW and I run in 1024x768 mode. I run both TCPIP and DECNET
- > (with PATHWORKS.) I have this whole configuration stable with 2.8 (it
- > took awhile) but it all unraveled with 3.03.
- >
- > with 2.8 I load both my packet driver and the PKTINT.COM file high. As
- > the 3.03 directions told me I changed that and loaded them normally.
- > But I was to able to boot. I would lock up when trying to load
- > PATHWORKS (of all things.)
- >
- > I did not do a complete debugging (I did not try commenting out DECNET
- > and PATHWORKS) but I figure if I can't run my other software with 3.03,
- > then I will just stay with 2.8.
- >
- > If the QPC people would like to know more - or would like me to try
- > some fixes, they should send me email. (I am a registered user of
- > WINQVT.)
- >
- > danny
- >===========================================================================
- >daniel david mittleman - danny@arizona.edu - (602) 621-2932
- >
- > (By the way, I am a VERY HAPPY customer of 2.8.)
-
- Danny,
- I had the same problem, but "cured" it by loading PKTINT.COM after Pathworks
- loads. Like this, in my autoexec.bat:
- .
- .
- .
- Call startnet
- c:\qvt\pktint.com
- win
-
- All is fine again...Pathworks and QVT together. (I'm using NDIS drivers,
- though, not packet drivers).
- HTH
- ===========================================================================
- | Tom Carter | carter@cemvax.cem.msu.edu |
- | Michigan State University | carter@msucem.bitnet |
- | Chemistry Department | |
- ==========================================================================
-