home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!ferkel.ucsb.edu!taco!rock!concert!rutgers!cs.utexas.edu!sdd.hp.com!spool.mu.edu!agate!ames!kronos.arc.nasa.gov!iscnvx!netcomsv!micromed!system
- From: system@micromed.com (Duane Davis)
- Newsgroups: comp.os.coherent
- Subject: Re: Com port troubles..very confusing..
- Message-ID: <Lk3cuB1w165w@micromed.com>
- Date: 17 Nov 92 02:10:44 GMT
- References: <1992Nov16.000411.4441@spcvxb.spc.edu>
- Organization: Micro-Medic BBS - +1 408 279 5240 - Public Access
- Lines: 33
-
- mauritz_c@spcvxb.spc.edu writes:
-
- > I'm getting very frustrated with my system. :-) Suddenly, without
- > any apparent reason, my uucico cannot dial out anymore. I have
- > cranked up the debug level and I can only get it to say "line problem".
- > I remembered in the past that I got this error when all of the baud
- > rates in the various config files didn't agree. However, this should
- > not be the case as I haven't changed anything and it worked yesterday!
- >
- > When I invoke uucico, it:
- >
- > disables the port
- > sends the init string to the modem
- > immediately (1 second later) enables the port again
- > says that I have a "line problem"
- > Abnormal completion
- >
- > I would appreciate any help from you guys. I'm starting to worry
- > about filling up my spool space on my newsfeed site...sigh....
- >
- > The really weird part is that ckermit has no problems at all using
- > the port/modem. I'm using it now to dial into my feed site and
- > type this message...
-
- Have your tried running "uucheck"? I had this same problem and uucheck
- fixed it.
-
-
- ---
- system@micromed.com (Duane Davis) voice (408)293-3299
- Micro-Medic public access usenet (408)279-5240
- 711 Lincoln Avenue public access pcboard (408)280-1610
- San Jose, CA 95126 FileServer - FTPMail@micromed.com
-